4-PIECE THICK STOCK SLOT PUNCH SET

$45.00

THE THICK STOCK SLOT PUNCH

THE THICK STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THICKER MATERIAL (GENERALLY 3/8-INCH AND THICKER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*

Quantity:

Add To Cart

THE THICK STOCK SLOT PUNCH

THE THICK STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THICKER MATERIAL (GENERALLY 3/8-INCH AND THICKER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*

THE THICK STOCK SLOT PUNCH

THE THICK STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THICKER MATERIAL (GENERALLY 3/8-INCH AND THICKER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*