5-PIECE THIN STOCK SLOT PUNCH SET

$60.00

THE THIN STOCK SLOT PUNCH

THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

XX-LARGE (APPROXIMATELY 1-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*

Quantity:

Add To Cart

THE THIN STOCK SLOT PUNCH

THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

XX-LARGE (APPROXIMATELY 1-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*

THE THIN STOCK SLOT PUNCH

THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)

THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.

SIZES:

SMALL (APPROXIMATELY 3/8-INCH WIDE)

MEDIUM (APPROXIMATELY 1/2-INCH WIDE)

LARGE (APPROXIMATELY 5/8-INCH WIDE)

EXTRA-LARGE (APPROXIMATELY 3/4-INCH WIDE)

XX-LARGE (APPROXIMATELY 1-INCH WIDE)

MATERIAL: 5160 SPRING STEEL

LENGTH: 8-9 INCHES

*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*