XX-LARGE THIN STOCK SLOT PUNCH
THE THIN STOCK SLOT PUNCH
THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)
THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.
SIZE:
XX-LARGE (APPROXIMATELY 1-INCH WIDE)
MATERIAL: 5160 SPRING STEEL
LENGTH: 8-9 INCHES
*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*
THE THIN STOCK SLOT PUNCH
THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)
THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.
SIZE:
XX-LARGE (APPROXIMATELY 1-INCH WIDE)
MATERIAL: 5160 SPRING STEEL
LENGTH: 8-9 INCHES
*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*
THE THIN STOCK SLOT PUNCH
THE THIN STOCK SLOT PUNCH IS USED FOR PUNCHING COMPLETELY THROUGH THINNER MATERIAL (GENERALLY 3/8-INCH AND THINNER.)
THESE PUNCHES ARE NOT HARDENED AND TEMPERED. WE RECOMMEND THESE PUNCHES FOR PUNCHING HOT/HEATED MATERIAL.
SIZE:
XX-LARGE (APPROXIMATELY 1-INCH WIDE)
MATERIAL: 5160 SPRING STEEL
LENGTH: 8-9 INCHES
*COOLING/LUBRICATING IN OIL OR FUCHS COOLANT IS RECOMMENDED DURING USE*